REAR SPEED SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY

   
   

   1. Install the rear axle hub and bearing assembly Click here.

      Tech Tips

      
      

      • The rear speed sensor is a component of the rear axle hub and bearing assembly. If the rear speed sensor malfunctions, replace the rear axle hub and bearing assembly.

      • If the sensor rotor needs to be replaced, replace the rear axle hub and bearing assembly.

2. CONNECT REAR SPEED SENSOR WIRE

   
   

   1. Connect the rear speed sensor wire connector to the rear speed sensor.

3. INSPECT REAR AXLE HUB BEARING LOOSENESS

   Click here

4. INSPECT REAR AXLE HUB RUNOUT

   Click here

5. INSTALL REAR DISC

   Click here

6. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY

   Click here

7. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

   Click here

8. INSTALL PARKING BRAKE LEVER PROTECTOR

   Click here

9. INSTALL REAR SUSPENSION ARM COVER

   Click here

10. ADJUST PARKING BRAKE

    Click here

11. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for LHD)

    Click here

12. INSTALL INSTRUMENT SIDE PANEL LH (for LHD)

    Click here

13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for LHD)

    Click here

14. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

15. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY (for RHD)

    Click here

16. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

17. INSTALL REAR WHEEL

    Torque:

    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

18. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    
    

    1. Connect the cable to the negative (-) auxiliary battery terminal.

       
       

       • for 2ZR-FXE: Click here

       • for 5ZR-FXE: Click here

    2. Connect the reservoir level switch connector.

    3. Clear the DTCs Click here.

19. CHECK FOR SPEED SENSOR SIGNAL

    Click here