SKID CONTROL BUZZER(for LHD) REMOVAL

PROCEDURE

1. PRECAUTION

   CAUTION:

   Be sure to read Precaution thoroughly before servicing Click here.

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal, Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   
   

   • for 2ZR-FXE: Click here

   • for 5ZR-FXE: Click here

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

5. REMOVE SKID CONTROL BUZZER ASSEMBLY

   
   

   1. 

      Disengage the clamp to remove the skid control buzzer assembly.

   2. Disconnect the skid control buzzer connector.