PROCEDURE
INSTALL TELEMATICS TRANSCEIVER
INSTALL NO. 2 TELEMATICS TRANSCEIVER BRACKET
Install the No. 2 telematics transceiver bracket with the 2 screws.
INSTALL TELEMATICS TRANSCEIVER WITH BRACKET
Install the telematics transceiver with bracket with the 3 screws.
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
INSTALL AIR CONDITIONING CONTROL ASSEMBLY
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)
INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)
INSTALL INSTRUMENT SIDE PANEL
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD: Click here
for RHD: Click here
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE
INSTALL DECK FLOOR BOX RH
INSTALL REAR NO. 3 FLOOR BOARD
INSTALL REAR DECK FLOOR BOX
INSTALL REAR NO. 2 FLOOR BOARD
PRECAUTION FOR TELEMATICS TRANSCEIVER REPLACEMENT
Tech Tips
When replacing the telematics transceiver, perform the vehicle contract setting Click here.