TELEMATICS TRANSCEIVER REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

2. REMOVE REAR NO. 2 FLOOR BOARD

   Click here

3. REMOVE REAR DECK FLOOR BOX

   Click here

4. REMOVE REAR NO. 3 FLOOR BOARD

   Click here

5. REMOVE DECK FLOOR BOX RH

   Click here

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

   Click here

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

8. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

   Tech Tips

   Use the same procedure for the RH and LH side Click here.

9. REMOVE INSTRUMENT SIDE PANEL

   Click here

10. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)

    Click here

11. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)

    Click here

12. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

13. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

14. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

15. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

16. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

17. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

18. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    Click here

19. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

20. REMOVE TELEMATICS TRANSCEIVER WITH BRACKET

    
    

    1. 

       Remove the 3 screws and telematics transceiver with bracket.

21. REMOVE NO. 2 TELEMATICS TRANSCEIVER BRACKET

    
    

    1. 

       Remove the 2 screws and No. 2 telematics transceiver bracket.

22. REMOVE TELEMATICS TRANSCEIVER