ROCKER PANEL MOULDING REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL ROCKER PANEL MOULDING RETAINER LH

   
   

   1. Attach the 4 claws to install the rocker panel moulding retainer LH.

2. INSTALL NO. 3 ROCKER PANEL MOULDING PROTECTOR

   Tech Tips

   When installing the No. 3 rocker panel moulding protector, heat the body rocker panel moulding using a heat light.

   Standard
   Item Temperature Body Rocker Panel Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the body rocker panel moulding excessively.

   
   

   1. Clean the body rocker panel moulding surface.

      
      

      1. Using a heat light, heat the body rocker panel moulding surface.

      2. Remove the double-sided tape from the body rocker panel moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new No. 3 rocker panel moulding protector.

      
      

      1. Using a heat light, heat the body rocker panel moulding.

      2. Remove the peeling paper from the face of the No. 3 rocker panel moulding protector.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. 

         Install the No. 3 rocker panel moulding protector as shown in the illustration.

         Tech Tips

         Press the No. 3 rocker panel moulding protector firmly to install it.

3. INSTALL NO. 4 ROCKER PANEL MOULDING PROTECTOR

   Tech Tips

   When installing the No. 4 rocker panel moulding protector, heat the body rocker panel moulding using a heat light.

   Standard
   Item Temperature Body Rocker Panel Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the body rocker panel moulding excessively.

   
   

   1. Clean the body rocker panel moulding surface.

      
      

      1. Using a heat light, heat the body rocker panel moulding surface.

      2. Remove the double-sided tape from the body rocker panel moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install 4 new No. 4 rocker panel moulding protectors.

      
      

      1. Using a heat light, heat the body rocker panel moulding.

      2. Remove the peeling paper from the face of the No. 4 rocker panel moulding protector.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 4 rocker panel moulding protector as shown in the illustration.

         Tech Tips

         Press the No. 4 rocker panel moulding protector firmly to install it.

         

         Text in Illustration

         *A

         for Standard Body

         *B

         for Long Body

4. INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR

   Tech Tips

   When installing the No. 2 rocker panel moulding protector, heat the body rocker panel moulding using a heat light.

   Standard
   Item Temperature Body Rocker Panel Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the body rocker panel moulding excessively.

   
   

   1. Clean the body rocker panel moulding surface.

      
      

      1. Using a heat light, heat the body rocker panel moulding surface.

      2. Remove the double-sided tape from the body rocker panel moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new No. 2 rocker panel moulding protector.

      
      

      1. Using a heat light, heat the body rocker panel moulding.

      2. Remove the peeling paper from the face of the No. 2 rocker panel moulding protector.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 rocker panel moulding protector as shown in the illustration.

         Tech Tips

         Press the No. 2 rocker panel moulding protector firmly to install it.

         

         Text in Illustration

         *A

         for Standard Body

         *B

         for Long Body

5. INSTALL NO. 1 ROCKER PANEL MOULDING PROTECTOR

   Tech Tips

   When installing the No. 1 rocker panel moulding protector, heat the body rocker panel moulding using a heat light.

   Standard
   Item Temperature Rocker Panel Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the body rocker panel moulding excessively.

   
   

   1. Clean the body rocker panel moulding surface.

      
      

      1. Using a heat light, heat the body rocker panel moulding surface.

      2. Remove the double-sided tape from the body rocker panel moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new No. 1 rocker panel moulding protector.

      
      

      1. Using a heat light, heat the body rocker panel moulding.

      2. Remove the peeling paper from the face of the No. 1 rocker panel moulding protector.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 rocker panel moulding protector as shown in the illustration.

         Tech Tips

         Press the No. 1 rocker panel moulding protector firmly to install it.

         

         Text in Illustration

         *A

         for Standard Body

         *B

         for Long Body

6. INSTALL ROCKER PANEL MOULDING CLIP

   
   

   1. for Standard Body:

      Install the 10 rocker panel moulding clips.

   2. for Long Body:

      Install the 11 rocker panel moulding clips.

      

      Text in Illustration

      *A

      for Standard Body

      *B

      for Long Body