ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH

   Click here

2. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH

   Click here

3. REMOVE QUARTER PANEL WHEEL OPENING MOULDING LH

   Click here

4. REMOVE NO. 6 ROCKER PANEL MOULDING PROTECTOR

   
   

   1. Using a clip remover, remove the clip.

   2. Remove the 2 screws and No. 6 rocker panel moulding protector.

      

      Text in Illustration

      *A

      for 2WD

      *B

      for AWD

5. REMOVE FRONT DOOR NO. 3 WEATHERSTRIP LH

   
   

   1. Fully open the front door and rear door.

   2. for Standard Body:

      Detach the 12 clips and remove the front door No. 3 weatherstrip LH.

   3. for Long Body:

      Detach the 13 clips and remove the front door No. 3 weatherstrip LH.

      

      Text in Illustration

      *A

      for Standard Body

      *B

      for Long Body

6. REMOVE ROCKER PANEL MOULDING LH

   
   

   1. 

      Remove the screw on the front side.

   2. 

      Remove the screw on the rear side.

   3. for Standard Body:

      Using a clip remover, remove the 7 clips.

   4. for Long Body:

      Using a clip remover, remove the 8 clips.

      

      Text in Illustration

      *A

      for Standard Body

      *B

      for Long Body

   5. 

      Remove the 2 screws.

   6. Put protective tape around the rocker panel moulding LH.

   7. for Standard Body:

      Detach the 10 clips and remove the rocker panel moulding LH.

   8. for Long Body:

      Detach the 11 clips and remove the rocker panel moulding LH.

      

      Text in Illustration

      *A	for Standard Body	*B	for Long Body
      *1	Protective Tape	-	-