LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY


    1. Measure the resistance of the switch.

      A001AIAE13
      Text in Illustration
      *a

      Component without harness connected

      (Luggage Door Opening Cancel Switch Assembly)

      		 *b Push
      Standard resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher

      If the result is not as specified, replace the luggage door opening cancel switch assembly.