LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE ELECTRICAL KEY SWITCH


    1. A001B0UE04
      Text in Illustration
      *a

      Component without harness connected

      (Luggage Electrical Key Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      5 (UL) - 10 (E) Off 10 kΩ or higher
      5 (UL) - 10 (E) On Below 1 Ω

      • If the result is not as specified, replace the luggage electrical key switch.