LUGGAGE DOOR HINGE TORSION BAR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • The installation should be performed in the order of LH to RH.

  • After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.

PROCEDURE


  1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A001AZ2

      Squeeze the two sides of the No. 2 luggage compartment door torsion bar support indicated by the arrows and install it as shown in the illustration.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH

    A001C86E01

    1. Set the tip of the luggage door hinge torsion bar LH in the installation hole in the center. The upper and lower holes are used for adjustment.

      Text in Illustration
      *a Installation Hole (for Adjustment)
      *b Installation Hole
    2. A001AOJ

      Connect the luggage door hinge torsion bar LH to the body RH side.

    3. A001BPJ

      Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.

    4. A001FJME05

      Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and body LH side

      SST
      09804-24010

  3. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH


    1. A001DN4E03
      Text in Illustration
      *a Installation Hole (for Adjustment)
      *b Installation Hole

      Set the tip of the luggage door hinge torsion bar RH in the installation hole in the center. The upper and lower holes are used for adjustment.

    2. A0019UU

      Connect the luggage door hinge torsion bar RH to the body LH side.

    3. A0019AR

      Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support.

    4. A001AZBE05

      Using SST, install the luggage door hinge torsion bar RH to the luggage door hinge and body RH side.

      SST
      09804-24010
    5. A001FV1

      Attach the 3 clips and install the luggage door wire.

  4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A001CFFE01
      Text in Illustration
      *A w/o Rear Cooler
      *B w/ Rear Cooler

      Install the luggage compartment trim cover assembly RH with the claw and 2 clips.

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A001C3NE03
      Text in Illustration
      *A w/o Rear Cooler
      *B w/ Rear Cooler

      Install the luggage compartment trim cover assembly LH with the claw and 2 clips.

  6. INSTALL REAR FLOOR FINISH PLATE


    1. A001FNS

      Attach the 4 clips to install the rear floor finish plate.

    2. Install the 3 clips.

  7. INSTALL TOOL BOX (w/o Spare Tire)

    Click here

  8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

  9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. w/o Rear Cooler:


      1. A001DNF

        Install the front luggage compartment trim cover with the 4 claws and 3 clips.

      2. Attach the 3 clips.

      3. Install the 2 rope hooks.

    2. w/ Rear Cooler:


      1. A001AY0

        Install the front luggage compartment trim cover with the 4 claws and 5 clips.

      2. Install the 2 rope hooks.

  10. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)

    Click here

  11. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler)


    1. Attach the No. 2 luggage compartment trim hook.

  12. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY


    1. A001ELK

      Connect the connector.

    2. Attach the 2 claws to install the No. 1 luggage compartment light assembly.

  13. INSTALL DECK TRIM SIDE BOARD LH

    A001CH2E04
    Text in Illustration
    *A w/ Spare Tire
    *B w/o Spare Tire

    1. w/ Spear Tire:


      1. Install the deck trim side board LH with the clip.

    2. w/o Spear Tire:


      1. Attach the clip to install the deck trim side board LH.

  14. INSTALL DECK TRIM SIDE BOARD RH

    A001BA5E04
    Text in Illustration
    *A w/ Spare Tire
    *B w/o Spare Tire

    1. w/ Spear Tire:


      1. Install the deck trim side board RH with the clip.

    2. w/o Spear Tire:


      1. Attach the clip to install the deck trim side board RH.

  15. INSTALL ROPE HOOK ASSEMBLY


    1. A001EFD

      Install the 4 rope hook assemblies with the 4 bolts.

  16. INSTALL ROPE HOOK


    1. A001ER5

      Install the 2 rope hooks.

  17. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A001AUD

  18. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A001AVM

  19. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A001E1J

      Install the luggage compartment door hinge cover LH with the 3 clips.

  20. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH


    1. A001DCE

      Install the luggage compartment door hinge cover RH with the 3 clips.