HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE FRONT FENDER PROTECTOR UPPER LH

    Click here

  3. REMOVE FRONT BUMPER ENERGY ABSORBER

    Click here

  4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  5. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A001CIF

      Remove the 3 screws.

    2. Detach the claw and 2 clamps and remove the hood lock control cable cover.

  6. REMOVE HOOD LOCK ASSEMBLY


    1. A001D15E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A001A8HE01
      Text in Illustration
      *1 Hood Lock Nut
      *2 Hood Lock Control Cable Assembly

      Remove the 2 bolts and hood lock nut.

    3. Remove the hood lock assembly.

    4. Disconnect the hood lock control cable assembly.

  7. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A001CPT

      Detach the 2 claws.

    2. Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  8. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. Detach the clamps shown in the illustration.

      A001D9A

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the cable from the engine room and remove it.