POWER TRUNK LID SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus:

      Select: Body / (desired system) / DTC /

    5. Check the DTCs.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus:

      Select: Body / (desired system) / DTC /

    5. Clear the DTCs.