REAR SEAT CUSHION HEATER(for Ottoman) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH


    1. Set the separate type rear seat cushion cover LH in place.

    2. A001E5CE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type rear seat cushion cover LH to the rear seat cushion pad LH with 15 new hog rings.

      Note


      • Be careful not to damage the separate type rear seat cushion cover LH.

      • shown in the illustration while preventing wrinkles from forming on the separate type rear seat cushion cover LH.

  2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH


    1. Set the separate type rear seat cushion cover RH in place.

    2. Attach the 10 claws to install the separate type rear seat cushion cover RH to the rear seat cushion pad RH.

    3. Attach the 2 pieces of fastening tape.

    4. Using hog ring pliers, install 18 new hog rings.

      Note


      • Be careful not to damage the separate type rear seat cushion cover RH.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seat cushion cover RH.

      A001EY9E02
      Text in Illustration
      *1 Fastening Tape *2 Hog Ring Pliers

  3. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY LH

    Click here

  4. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY RH

    Click here

  5. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

  6. INSTALL REAR SEAT CUSHION ASSEMBLY RH

    Click here

  7. CHECK REAR SEAT ASSEMBLY

    Click here