REAR SEAT CUSHION HEATER(for Ottoman) INSPECTION

PROCEDURE

1. INSPECT SEPARATE TYPE REAR SEAT CUSHION COVER LH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Separate Type Rear Seat Cushion Cover LH (Seat Cushion Part))

      Check the resistance of the separate type rear seat cushion cover LH (seat cushion part).

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 3 - 8 17 to 23°C (63 to 73°F) 1.8 to 2.1 Ω 2 - 8 17 to 23°C (63 to 73°F) 1.8 to 2.1 Ω 7 - 4 17 to 23°C (63 to 73°F) 1.8 to 2.1 Ω

         If the result is not as specified, replace the separate type rear seat cushion cover LH.

   2. 

      Text in Illustration

      *a	Component without harness connected (Separate Type Rear Seat Cushion Cover LH (LH Side))

      Check the resistance of the separate type rear seat cushion cover LH (LH side).

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 17 to 23°C (63 to 73°F) 14.2 to 17.4 Ω

         If the result is not as specified, replace the separate type rear seat cushion cover LH.

   3. 

      Text in Illustration

      *a	Component without harness connected (Separate Type Rear Seat Cushion Cover LH (RH Side))

      Check the resistance of the separate type rear seat cushion cover LH (RH side).

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 17 to 23°C (63 to 73°F) 14.2 to 17.4 Ω

         If the result is not as specified, replace the separate type rear seat cushion cover LH.

2. INSPECT SEPARATE TYPE REAR SEAT CUSHION COVER RH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Separate Type Rear Seat Cushion Cover RH (Seat Cushion Part))

      Check the resistance of the separate type rear seat cushion cover RH (seat cushion part).

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 3 - 8 17 to 23°C (63 to 73°F) 2.2 to 2.7 Ω 2 - 8 17 to 23°C (63 to 73°F) 2.2 to 2.7 Ω 7 - 4 17 to 23°C (63 to 73°F) 2.2 to 2.7 Ω

         If the result is not as specified, replace the separate type rear seat cushion cover RH.

   2. 

      Text in Illustration

      *a	Component without harness connected (Separate Type Rear Seat Cushion Cover RH (LH Side))

      Check the resistance of the separate type rear seat cushion cover RH (LH side).

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 17 to 23°C (63 to 73°F) 14.5 to 17.8 Ω

         If the result is not as specified, replace the separate type rear seat cushion cover RH.

   3. 

      Text in Illustration

      *a	Component without harness connected (Separate Type Rear Seat Cushion Cover RH (RH Side))

      Check the resistance of the separate type rear seat cushion cover RH (RH side).

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 17 to 23°C (63 to 73°F) 14.5 to 17.7 Ω

         If the result is not as specified, replace the separate type rear seat cushion cover RH.