FRONT SEATBACK HEATER INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A001CNTE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seatback Cover (Back Part))

      Check the resistance of the separate type front seatback cover (back part).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.8 Ω

        If the result is not as specified, replace the separate type front seatback cover.

    2. A001CNTE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seatback Cover (Wing Part))

      Check the resistance of the separate type front seatback cover (wing part).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 7.1 to 8.6 Ω

        If the result is not as specified, replace the separate type front seatback cover.