SEAT HEATER SWITCH(for Fixed Seat Type) REMOVAL

PROCEDURE


  1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE BENCH TYPE REAR SEATBACK ASSEMBLY

    Click here

  3. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

    Click here

  4. REMOVE REAR NO. 1 SEAT CENTER ARMREST PANEL


    1. A001BCQE01

      Using moulding remover A, detach the 8 claws and 3 guides to remove the rear No. 1 seat center armrest panel together with the rear seat armrest hole board as indicated by the arrows in the order shown in the illustration.

    2. Disconnect the 2 connectors.

    3. A001DP1

      Remove the 3 screws and rear No. 1 seat center armrest panel from the rear seat armrest hole board.

  5. REMOVE REAR POWER SEAT SWITCH


    1. A001D62

      Remove the 4 screws and rear power seat switch.