LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • for Driver Side:

    Operate the power seat switch to move the cushion length adjustment to the foremost position.

  • for Ottoman (Front Passenger Side):

    Operate the power seat switch to move the ottoman to the foremost position.

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE FRONT SEAT CUSHION SHIELD LH

    Click here

  3. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD LH (for Driver Side)

    Click here

  4. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)

    Click here

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  7. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  8. REMOVE FRONT SEAT CUSHION ASSEMBLY LH

    Click here

  9. REMOVE FRONT SEAT HEADREST ASSEMBLY

    Click here

  10. REMOVE FRONT SEAT HEADREST SUPPORT

    Click here

  11. REMOVE POWER SEAT SWITCH ASSEMBLY (w/ Shoulder Switch)

    Click here

  12. REMOVE FRONT SEATBACK COVER WITH PAD

    Click here

  13. REMOVE FRONT SEATBACK FRAME ASSEMBLY LH

    Click here

  14. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar Support)


    1. A001CDC

      Remove the 4 bolts.

    2. Rotate the snap in the direction indicated by the arrow shown in the illustration to detach the snap from the lumbar support adjuster assembly LH.

      Tech Tips

      Use the same procedure to detach the snap on the other side.

    3. Detach the 2 claws to remove the lumbar support adjuster assembly LH.

      A001APM

  15. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (w/o Lumbar Support)


    1. A001FG9

      Remove the 2 bolts.

    2. Rotate the snap in the direction indicated by the arrow shown in the illustration to detach the snap from the lumbar support adjuster assembly RH.

      Tech Tips

      Use the same procedure to detach the snap on the other side.

    3. Detach the 2 claws to remove the lumbar support adjuster assembly RH.

      A001BZC