POWER WINDOW MASTER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A001ESM

      Using a screwdriver, detach the 2 clamps.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Detach the front armrest base panel assembly.

    3. A001B3T

      Disconnect the connector.

    4. A001CKM

      Remove the 3 screws and multiplex network master switch assembly.