LOW PITCHED HORN INSTALLATION

PROCEDURE

1. INSTALL LOW PITCHED HORN ASSEMBLY

   
   

   1. for Type A:

      
      

      1. Connect the horn connector.

      2. Install the horn with the bolt.

         Torque:

         19 N*m  { 194 kgf*cm, 14 ft.*lbf }

   2. for Type B:

      
      

      1. Connect the horn connector.

      2. Install the horn with the bolt.

         Torque:

         19 N*m  { 194 kgf*cm, 14 ft.*lbf }

2. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

   Click here

4. INSTALL ENGINE ROOM SIDE COVER LH

   Click here

5. INSTALL ENGINE ROOM SIDE COVER RH

   Click here