DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   

   
   

   1. Install the door control receiver with the nut.

   2. Connect the connector.

      Note

      When replacing or inspecting the door control receiver and wire harness, do not change the position or length of the wire harness. If the wire harness is too close to the door control receiver, entry and wireless function performance may be affected.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

   Click here

3. INSTALL REAR FLOOR FINISH PLATE

   Click here

4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

5. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)

   Click here

6. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler)

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

8. INSTALL DECK TRIM SIDE BOARD RH

   Click here

9. INSTALL ROPE HOOK

   Click here

10. INSTALL ROPE HOOK ASSEMBLY

    Click here

11. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here