METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE METER / GAUGE SYSTEM

   
   

   1. Customizing with the intelligent tester

      
      

      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

         Warning

         Display	Default	Content	Setting	Relevant ECU
         Key Remind Volume	Large	Function to change the key reminder buzzer sound volume	Large, Medium or Small	No. 1 meter ECU
         Key Remind Sound	Normal	Function to change the key reminder buzzer sound frequency	Normal, Fast or Slow	No. 1 meter ECU
         Seat Belt Warning*	D/P ON	Function to change the seat belt warning buzzer setting	D/P ON, D ON, P ON or D/P OFF	No. 1 meter ECU

         
         

         • *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

         Display

         Display	Default	Content	Setting	Relevant ECU
         ECO Drive Indicator Zone	ON	Function to enable or disable eco driving indicator zone display in the multi-information display	ON or OFF	No. 1 meter ECU
         ODO Display Time After IG OFF Setting	30 s	Function to change the odometer display time	30 s, 60 s, 600 s or OFF	No. 1 meter ECU

   2. Customizing with the combination meter

      
      

      1. Turn the engine switch on (IG).

      2. Enter the following menus: Settings.

      3. Select the setting by referring to the table below.

         Meter Setting

         Display	Default	Content	Setting	Relevant ECU
         Language	American English	Function to change the multi-information display language	American English, Francais, Deutsch, Espanol, Italiano or pyccknn	No. 1 meter ECU
         Units	km (L/100km)	Function to change the multi-information display unit	km (km/L) or km (L/100km)	No. 1 meter ECU
         ECO lamp	ON (Self-lighting)	Function to turn on/off the eco light setting	ON (Self-lighting), OFF or ON (Always)	No. 1 meter ECU
         Drive monitor	Cruising range	Function to change the drive monitor setting	Fuel consumption or Cruising range	No. 1 meter ECU
         Lamp brightness	Standard	Function to change the meter illumination setting	Bright or Standard	No. 1 meter ECU
         SPORT lamp	ON	Function to turn on/off the sport light setting	ON or OFF	No. 1 meter ECU
         Default settings	OFF	Function to turn on/off the default setting	ON or OFF	No. 1 meter ECU