HEADLIGHT CLEANER ACTUATOR REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER

    Click here

  3. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER

    Click here

  4. REMOVE HEADLIGHT CLEANER HOSE


    1. except Sport Package:


      1. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH.

        A001BTT

      2. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.

      3. Detach the 9 clamps and remove the headlight cleaner hose.

    2. for Sport Package:


      1. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly LH and drain the washer fluid.

        A001E0Y

      2. Disconnect the headlight cleaner hose from the headlight washer actuator sub-assembly RH and drain the washer fluid.

      3. Detach the 9 clamps and remove the headlight cleaner hose.

  5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    1. A001BC5

      Remove the screw and headlight washer actuator sub-assembly LH.

    2. Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

      A001CU4

  6. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH


    1. A001AQ5

      Remove the screw and headlight washer actuator sub-assembly RH.

    2. Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

      A001ALB
    3. A001B3Q

      Remove the spring nut from the headlight washer actuator sub-assembly LH

  7. REMOVE WASHER BRACKET

    Tech Tips


    • Use the same procedure for the RH and LH sides.

    • The procedure listed below is for the LH side.


    1. except Sport Package:


      1. A001ERF

        Remove the washer bracket from the front bumper together with the double-sided tape.

        Note


        • If the double-sided tape remains on the bumper, remove it completely.

        • The headlight cleaner bracket is a non-reusable part.

    2. for Spots Package:


      1. A001B96

        Remove the washer bracket from the front bumper together with the double-sided tape.

        Note


        • If the double-sided tape remains on the bumper, remove it completely.

        • The washer bracket is a non-reusable part.