WIPER SWITCH INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A001D1S

      Attach the claw and install the wiper switch.

    2. Connect the connectors.

  2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)


    1. A001ATJ

      Attach the 4 clips to install the steering column cover upper onto the instrument panel cluster finish panel.

    2. Attach the claw to install the steering column cover upper.

    3. A001BID

      Attach the 2 claws to install the steering column cover lower.

      Note

      Do not damage the tilt and telescopic switch.

    4. Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.

  3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)


    1. Connect the connector.

    2. A001ER3

      Attach the 4 clips to install the steering column cover upper onto the instrument panel cluster finish panel.

    3. Attach the claw to install the steering column cover upper.

    4. A001BID

      Attach the 2 claws to install the steering column cover lower.

      Note

      Do not damage the tilt and telescopic switch.

    5. Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.