INTERIOR ILLUMINATION LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. REMOVE NO. 3 BOX PANEL

    Click here

  6. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  10. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  11. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  12. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  13. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (INTERIOR ILLUMINATION LIGHT)

    A001A9I

    1. Detach the 2 clamps.

    2. Remove the 6 screws and No. 1 instrument panel garnish sub-assembly (interior illumination light).

      A001F71

  14. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  15. REMOVE INSTRUMENT PANEL ORNAMENT

    Click here

  16. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (INTERIOR ILLUMINATION LIGHT)

    A001ADY

    1. Remove the screw.

    2. Detach the guide to remove the No. 2 instrument panel garnish sub-assembly (interior illumination light).