VANITY LIGHT(for Rear) INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSPECT REAR VANITY LIGHT ASSEMBLY

    A001G03E03
    Text in Illustration
    *a

    Component without harness connected

    (Rear Vanity Light Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (B) - 3 (RRVS) Rear vanity light CLOSE 10 kΩ or higher
      Rear vanity light OPEN Below 1 Ω

      • If the result is not as specified, replace the rear vanity light assembly.

        Text in Illustration
        *a

        Component without harness connected

        (Rear Vanity Light Assembly)