FOOTWELL LIGHT(for Rear) INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

    A0019SKE26
    Text in Illustration
    *a

    Component without harness connected

    (No. 1 Interior Illumination Light Assembly LH)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 Illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.