DOOR COURTESY LIGHT(for Front Door) INSPECTION

PROCEDURE


  1. INSPECT COURTESY LIGHT ASSEMBLY

    A001E5ZE01
    Text in Illustration
    *a

    Component without harness connected

    (Courtesy Light Assembly)

    Tech Tips

    Use the same procedure for both courtesy lights.


    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Illuminates

      If the result is not as specified, replace the courtesy light assembly.