BLOWER UNIT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE AIR CONDITIONING UNIT

    Click here

  2. REMOVE BLOWER ASSEMBLY


    1. A001A16

      Remove the screw.

    2. Disconnect the connector.

    3. Detach the claw and remove the blower assembly.

  3. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    1. A001E03

      Remove the 3 screws and No. 1 blower damper servo sub-assembly.

  4. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. A001B55

      Remove the 3 screws and blower with fan motor sub-assembly.

  5. REMOVE CLEAN AIR FILTER


    1. A0019N7

      Detach the 2 claws and remove the clean air filter.