POWER SHOULDER BELT ANCHORAGE SYSTEM DTC CHECK / CLEAR


  1. CHECK DLC3


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus: Body / (Entry & Start) / DTC /

    5. Read the DTCs.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Enter the following menus: Body / (Entry & Start) / DTC /

    4. Erase the DTCs.