ACTIVE HEADREST INFLATOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT HEADREST BRACKET

    Click here

  2. INSTALL ACTIVE HEADREST INFLATOR


    1. A001DICE02
      Text in Illustration
      *1 Guide
      *2 Clamp

      Turn the active headrest inflator in the direction indicated by the arrow to install it.

    2. Attach the guide and 2 clamps.

    3. Install the bolt and nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    4. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  3. INSTALL SEATBACK COVER WITH PAD

    Click here

  4. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  5. INSTALL FRONT SEAT HEADREST ASSEMBLY

    Click here

  6. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  7. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  9. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH

    Click here

  10. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)

    Click here

  11. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  12. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly LH Click here.

  13. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.