CAN COMMUNICATION SYSTEM(for RHD), Diagnostic DTC:U0131

DTC Code DTC Name
U0131 Lost Communication with Power Steering Control Module

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
U0131 There is no communication from the power steering ECU assembly.

  • Power source or inside of power steering ECU assembly

  • Power steering ECU assembly

WIRING DIAGRAM

A001DXAE08
*a from Battery
*b from IG1 Relay
*c Power Steering ECU Assembly

CAUTION / NOTICE / HINT

Note

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (POWER STEERING ECU ASSEMBLY - BATTERY AND BODY GROUND)


    1. A001EZ2E01
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Power Steering ECU Assembly)

      Disconnect the power steering ECU assembly connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      A44-6 (+B) - Body ground Always 11 to 14 V
      A44-9 (IG) - Body ground Engine switch on (IG) 11 to 14 V

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A44-5 (PGND) - Body ground Always Below 1 Ω

    OK

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR