Note
After the engine switch is turned off, the multi-media module receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.
| Condition | Waiting Time |
|---|---|
| Vehicle enrolled in telematics system | 6 minutes |
| Vehicle not enrolled in telematics system | 1 minute |
PRECAUTIONS WHEN USING GTS
When using the GTS with the engine switch off to troubleshoot: Connect the GTS to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
After all DTCs are cleared, check if the trouble occurs again 6 seconds after the engine switch is turned on (IG).
PRECAUTIONS FOR MULTI-MEDIA MODULE RECEIVER ASSEMBLY (w/ Sound Library Function) Click here
PRECAUTIONS FOR HARD DISK DRIVE (HDD) (w/ Sound Library Function) Click here