STEREO COMPONENT AMPLIFIER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL NO. 2 AMPLIFIER BRACKET


    1. Install the No. 2 amplifier bracket with the 2 screws.

  2. INSTALL NO. 1 AMPLIFIER BRACKET


    1. Install the No. 1 amplifier bracket with the 2 screws.

  3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY


    1. Install the stereo component amplifier assembly with the 3 nuts.

    2. Connect each connector.

  4. INSTALL DOOR CONTROL RECEIVER

    Click here