HEATED STEERING WHEEL CONTROLLER REMOVAL

PROCEDURE

1. REMOVE COWL TOP VENTILATOR LOUVER

   Click here

2. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Click here

4. REMOVE STEERING WHEEL ASSEMBLY

   Click here

5. REMOVE STEERING PAD SWITCH ASSEMBLY

   Click here

6. REMOVE CRUISE CONTROL MAIN SWITCH ASSEMBLY

   Click here

7. REMOVE STEERING WHEEL BOSS COVER LOWER

   Click here

8. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY

   
   

   1. 

      Disconnect the connector clamp and remove the 2 screws and heater control assembly.