REAR SHOCK ABSORBER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman:

      Click here

    3. for Fixed Seat Type:

      Click here

  3. REMOVE NO. 6 ROCKER PANEL MOULDING PROTECTOR

    Click here

  4. REMOVE REAR WHEEL HOUSE LINER LH

    A0019BDE04
    *1 Front Side:
    *2 Rear Side:

    1. Remove the 3 screws, 11 nuts and 2 clips from the liner.

  5. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  6. REMOVE REAR SPEED SENSOR LH

    Click here

  7. REMOVE LOAD SENSING VALVE SENSOR BRACKET

    Click here

  8. DISCONNECT REAR UPPER NO. 2 CONTROL ARM ASSEMBLY LH

    Click here

  9. DISCONNECT REAR UPPER NO. 1 CONTROL ARM ASSEMBLY LH

    Click here

  10. DISCONNECT TOE CONTROL LINK SUB-ASSEMBLY LH

    Click here

  11. REMOVE REAR AXLE SHAFT NUT LH

    Click here

  12. REMOVE REAR SHOCK ABSORBER CAP LH

    A001CTF

    1. Remove the 3 nuts and cap.

  13. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH

    A001A0S

    1. Remove the 3 nuts on the upper side of the shock absorber.

    2. A001ESU

      Remove the nut from the shock absorber lower side.

    3. Angle the axle carrier's upper tip toward the vehicle's outer side, and remove the shock absorber.