FRONT UPPER SUSPENSION ARM(for 2WD) REMOVAL

CAUTION / NOTICE / HINT

Note

Be sure to read the "PRECAUTION" thoroughly before servicing Click here.

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE COWL TOP VENTILATOR LOUVER


    1. Remove the cowl top ventilator louver for 1UR-FSE Click here.

    2. Remove the cowl top ventilator louver for 1UR-FE Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

    Note

    After turning the engine switch off, waiting time may required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. REMOVE FRONT WHEEL

  4. DISCONNECT SPEED SENSOR CONNECTOR

    Click here

  5. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  6. REMOVE FRONT DISC

    Click here

  7. REMOVE FRONT DISC BRAKE DUST COVER LH

    Click here

  8. DISCONNECT TIE ROD ASSEMBLY LH

    Click here

  9. DISCONNECT FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH

    Click here

  10. DISCONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

    Click here

  11. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

    Click here

  12. REMOVE AIR CONNECTOR CLIP HOLDER (w/ Air Suspension)

    Click here

  13. DISCONNECT NO. 8 HEIGHT CONTROL TUBE (w/ Air Suspension)

    Click here

  14. DISCONNECT FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH

    Click here

  15. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  16. REMOVE ENGINE ROOM SIDE COVER LH

    Click here

  17. REMOVE FRONT SHOCK ABSORBER CAP LH (w/ Air Suspension)

    Click here

  18. REMOVE ABSORBER CONTROL ACTUATOR (w/ Air Suspension)

    Click here

  19. REMOVE FRONT SHOCK ABSORBER ASSEMBLY LH (w/o Air Suspension)

    Click here

  20. REMOVE PNEUMATIC CYLINDER WITH FRONT SHOCK ABSORBER ASSEMBLY LH (w/ Air Suspension)

    Click here

  21. REMOVE FRONT PNEUMATIC CYLINDER LH O-RING (w/ Air Suspension)

    Click here

  22. REMOVE STEERING KNUCKLE SUB-ASSEMBLY LH

    Click here

  23. REMOVE NO. 1 ARM ATTACHMENT PLATE INNER LH


    1. A001FL1

      Remove the 3 bolts and No. 1 arm attachment plate inner LH.

  24. REMOVE NO. 2 ARM ATTACHMENT PLATE INNER LH


    1. A001EDZ

      Remove the 2 bolts and No. 2 arm attachment plate inner LH.

  25. REMOVE FRONT NO. 1 SUSPENSION UPPER ARM ASSEMBLY LH


    1. Remove the bolt and nut, and then remove the front No. 1 suspension upper arm assembly LH from the No. 1 arm attachment plate inner LH.

  26. REMOVE FRONT NO. 2 SUSPENSION UPPER ARM ASSEMBLY LH


    1. Remove the bolt and nut, and then remove the front No. 2 suspension upper arm assembly LH from the No. 2 arm attachment plate inner LH.