FRONT SHOCK ABSORBER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE


  1. INSTALL FRONT SHOCK ABSORBER ASSEMBLY LH


    1. A001G0C

      Install the front shock absorber on the vehicle by installing the 3 nuts on the suspension support side.

      Torque:
      67 N*m  { 683 kgf*cm, 49 ft.*lbf }
    2. A001C4L

      Tighten the lock nut.

      Torque:
      28 N*m  { 280 kgf*cm, 20 ft.*lbf }

  2. INSTALL ENGINE ROOM SIDE COVER LH

    Click here

  3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

  4. TEMPORARILY TIGHTEN FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH

    Click here

  5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

    Click here

  6. CONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

    Click here

  7. INSTALL FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH

    Click here

  8. CONNECT TIE ROD ASSEMBLY LH

    Click here

  9. INSTALL FRONT DISC BRAKE DUST COVER LH

    Click here

  10. INSTALL FRONT DISC

    Click here

  11. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  12. CONNECT SPEED SENSOR CONNECTOR

    Click here

  13. STABILIZE SUSPENSION


    1. Install the front tires.

      Torque:
      140 N*m  { 1428 kgf*cm, 103 ft.*lbf }

    2. Lower the vehicle and bounce it up and down several times to stabilize the front suspension.

    3. Remove the front tires.

    4. A0019L9

      Jack up the front suspension lower arm with a wooden block between the jack and front suspension lower arm. Apply a load to the front suspension so that the front suspension lower arm is placed in a horizontal position.

  14. TIGHTEN FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH

    Click here

  15. INSTALL FRONT WHEEL

    Torque:
    140 N*m  { 1428 kgf*cm, 103 ft.*lbf }

  16. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT


    1. Inspect and adjust the front wheel alignment Click here.

  17. ADJUST HEADLIGHT ASSEMBLY

    Click here

  18. ADJUST OBJECT RECOGNITION CAMERA

    Click here