FRONT SHOCK ABSORBER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. DISCONNECT SPEED SENSOR CONNECTOR

    Click here

  3. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  4. REMOVE FRONT DISC

    Click here

  5. REMOVE FRONT DISC BRAKE DUST COVER LH

    Click here

  6. DISCONNECT TIE ROD ASSEMBLY LH

    Click here

  7. DISCONNECT FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH

    Click here

  8. DISCONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

    Click here

  9. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

    Click here

  10. DISCONNECT FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH

    Click here

  11. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

  12. REMOVE ENGINE ROOM SIDE COVER LH

    Click here

  13. REMOVE FRONT SHOCK ABSORBER ASSEMBLY LH


    1. A001C4L

      Loosen the lock nut of the front shock absorber.

      Note


      • Do not remove the lock nut.

      • Loosen the lock nut only when disassembling the front shock absorber with coil spring.

    2. A001G0C

      Remove the 3 nuts from the upper side of the front suspension support.

    3. Slowly lower the jack. Remove the bolt from the lower side to remove the front shock absorber with coil spring.