SUSPENSION CONTROL ECU(for RHD) REMOVAL

PROCEDURE


  1. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  2. DISCONNECT CONNECTORS (w/ Driver Monitor ECU)

  3. REMOVE SUSPENSION CONTROL ECU WITH BRACKET (w/o Network Gateway ECU)


    1. A001DZF

      Disconnect the suspension control ECU connectors.

      Tech Tips

      Do not apply excessive force to the wire harnesses.

    2. A001BO5

      Remove the 2 nuts and ECU with bracket.

  4. REMOVE NETWORK GATEWAY ECU (w/ Network Gateway ECU)

    Click here

  5. REMOVE SUSPENSION CONTROL ECU


    1. A001D0I

      Remove the 2 nuts and suspension control ECU from the bracket.

      Note


      • Avoid any impact to the suspension control ECU.

      • Do not drop the ECU. If it is dropped, replace it with a new one.