SUSPENSION CONTROL ECU(for LHD) REMOVAL

PROCEDURE


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  2. DISCONNECT CONNECTORS (w/ Clearance Warning ECU)

  3. DISCONNECT CONNECTORS (w/ Parking Assist ECU)

  4. REMOVE NETWORK GATEWAY ECU (w/ Network Gateway ECU)

    Click here

  5. REMOVE SUSPENSION CONTROL ECU WITH BRACKET (w/o Network Gateway ECU)


    1. A001DLW

      Disconnect the suspension control ECU connectors.

      Tech Tips

      Do not apply excessive force to the wire harnesses.

    2. A001DWH

      Remove the bolt, nut and bracket.

  6. REMOVE SUSPENSION CONTROL ECU


    1. A001C46

      Remove the 2 nuts and suspension control ECU from the bracket.

      Note


      • Avoid any impact to the suspension control ECU.

      • Do not drop the ECU. If it is dropped, replace it with a new one.