HEIGHT CONTROL COMPRESSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Be sure to read the "PRECAUTION" thoroughly before servicing Click here.

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE FRONT WHEEL RH

  3. REMOVE FRONT FENDER LINER RH


    1. Remove the 2 bolts.

    2. Partially remove the fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the compressor can be removed.

  4. REMOVE HEIGHT CONTROL COMPRESSOR


    1. A001E67

      Disconnect the 2 connectors and detach the 2 clamps.

    2. Disconnect the height control filter from the front bumper reinforcement.

    3. Disconnect the height control tube Click here.

    4. A001C5E

      Remove the 2 nuts, bolt and height control compressor with bracket.

    5. Detach the 3 clamps.

    6. Detach the connector's claw and remove the connector from the bracket.

    7. A001FE3

      Remove the 3 bolts, 3 bushings and bracket from the compressor.