ABSORBER CONTROL ACTUATOR(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  2. REMOVE REAR SHOCK ABSORBER CAP LH


    1. A001B2F

      Remove the 3 nuts and shock absorber cap.

    2. Disconnect the connector from absorber control actuator.

    3. Disconnect the absorber cap from wire harness.

  3. REMOVE ABSORBER CONTROL ACTUATOR


    1. A0019CJE01

      Turn the absorber control actuator counterclockwise approximately 40° to remove it.

      Note


      • Do not turn the actuator more than 40°.

      • Do not drop the absorber control actuator. If it is dropped, replace it with a new one.