TIRE PRESSURE WARNING INITIATOR(for Front Side) REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE FRONT FENDER MAIN SEAL RH

    Click here

  3. REMOVE FRONT FENDER WHEEL OPENING MOULDING RH


    1. A001CAJ

      Remove the 5 screws.

    2. Detach the clip and remove the moulding.

  4. REMOVE FRONT FENDER LINER RH


    1. A001DFG

      Remove the 15 screws, 6 clips and front fender liner RH.

  5. REMOVE FRONT TIRE PRESSURE MONITOR INITIATOR


    1. A001CAH

      Disconnect the connector.

    2. Remove the nut and front tire pressure monitor initiator.