TIRE PRESSURE WARNING RESET SWITCH INSPECTION

PROCEDURE


  1. CHECK TIRE PRESSURE WARNING RESET SWITCH


    1. A001BS6E01
      Text in Illustration
      *a

      Component without harness connected

      (Tire Pressure Warning Reset Switch)
      *b Released
      *c Pushed in

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Released 10 kΩ or higher
      1 - 2 Pushed in Below 1 Ω

      If the result is not as specified, replace the switch.