HEATED OXYGEN SENSOR(for 2WD) INSPECTION

PROCEDURE


  1. INSPECT HEATED OXYGEN SENSOR

    A001EREE01
    Component without harness connected
    *1 (heated oxygen sensor)

    1. Disconnect the heated oxygen sensor connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (HT) - 2 (+B) 20°C (68°F) 11 to 16 Ω

      If the result is not as specified, replace the heated oxygen sensor.