HEATED OXYGEN SENSOR(for 2WD) REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  3. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  4. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  5. REMOVE FRONT FLOOR SILENCER PAD LH

  6. REMOVE FRONT FLOOR SILENCER PAD RH

  7. REMOVE REAR NO. 2 AIR DUCT

  8. REMOVE REAR NO. 1 AIR DUCT

  9. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A001EUA

      Interior Side:

      Disconnect the heated oxygen sensor connector.

    2. A001DZ9E02

      Exterior Side:


      1. Remove the grommet.

      2. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

        SST
        09224-00010

  10. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A001COR

      Interior Side:

      Disconnect the heated oxygen sensor connector.

    2. A001BI5E02

      Exterior Side:


      1. Remove the grommet.

      2. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

        SST
        09224-00010