AIR FUEL RATIO SENSOR(for AWD) INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    1. A001BQGE04
      *1 Bracket
      *2 Fulcrum Length

      Using SST, install the air fuel ratio sensor to the exhaust manifold LH.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with a fulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

    2. Connect the air fuel ratio sensor connector.

      Tech Tips

      Hook the wire harness to the bracket.

  2. INSTALL AIR FUEL RATIO SENSOR NO.2 (for Bank 2 Sensor 1)


    1. A001FBSE02
      *1 Bracket
      *2 Fulcrum Length

      Using SST, install the air fuel ratio sensor to the exhaust manifold RH.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with a fulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

    2. Connect the air fuel ratio sensor connector.

      Tech Tips

      Hook the wire harness to the bracket.

  3. INSTALL ENGINE AND TRANSMISSION

    Click here