KNOCK SENSOR INSTALLATION

PROCEDURE


  1. INSTALL KNOCK SENSOR


    1. A001ER9E02

      Install the 4 knock sensors with the 4 bolts so that the sensors are angled as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Tech Tips

      The acceptable installation angle of the sensors is between 10° upwards and downwards from the horizontal position.

    2. Connect the 4 knock sensor connectors.

  2. INSTALL SEPARATOR CASE


    1. A001BB4

      Install the separator case with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
    2. A001F98

      Connect the fuel pressure sensor connector.

  3. INSTALL NO. 4 FUEL PIPE SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 2 ENGINE COVER SUB-ASSEMBLY LH

  5. INSTALL NO. 2 ENGINE COVER SUB-ASSEMBLY

  6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

  7. INSTALL INTAKE MANIFOLD

    Click here

  8. INSPECT FOR FUEL LEAK

    Click here