KNOCK SENSOR REMOVAL

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. REMOVE INTAKE MANIFOLD

    Click here

  3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY LH

    Click here

  6. REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY

    Click here

  7. REMOVE SEPARATOR CASE


    1. A001F98

      Disconnect the fuel pressure sensor connector.

    2. A001BB4

      Remove the 4 bolts and separator case.

  8. REMOVE KNOCK SENSOR


    1. A0019RXE02
      *1 Front

      Disconnect the 4 knock sensor connectors.

    2. Remove the 4 bolts and 4 knock sensors.