ENGINE OIL TEMPERATURE SENSOR(for AWD) INSTALLATION

PROCEDURE

1. INSTALL OIL TEMPERATURE SENSOR

   
   

   1. Install a new gasket and the oil temperature sensor.

      Torque:

      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note

      
      

      • Do not subject the oil temperature sensor to any impacts.

        If the oil temperature sensor is subjected to an impact, replace the oil temperature sensor with a new one.

      • Do not allow any moisture or foreign matter to enter the oil temperature sensor or its connector.

   2. Connect the oil temperature sensor connector.

2. INSPECT FOR OIL LEAK

   Click here

3. INSTALL NO. 1 ENGINE UNDER COVER

   Click here

4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

   Click here

5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

   Click here