ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR


    1. Install a new gasket to the engine coolant temperature sensor.

    2. A001D3CE01
      *1 Fulcrum Length

      Using a 19 mm ball joint lock nut wrench, install the engine coolant temperature sensor.

      Torque:
      20 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note


      • Do not use a tool such as an impact wrench or equivalent.

      • Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a ball joint lock nut wrench Click here.

    3. Connect the engine coolant temperature sensor connector.

  2. ADD ENGINE COOLANT

    Click here

  3. INSPECT FOR COOLANT LEAK

    Click here

  4. INSTALL INTAKE AIR CONNECTOR PIPE

    Click here